Series UAG
Page 20
Nov 11, 2015
Installation
S
IDE
R
EFLECTORS
&
B
OTTOM
S
HIELDS
•
If used, install side shields (reflectors) and/or bottom shield as required. Refer to Figure and
Figure for details.
•
Side shields are 124" long. Fasten one side shield per reflector with #8 x 3/8" screws. Use three
side shield brackets per side shield. Space about 48" apart, refer to Figure 17.
Figure 17: Side Shield Overlap
Reflector
Hanger
Side Reflector Bracket
(approx. 48" apart)
#8 x 3/8" Screw
#8 x 3/8" Screw
Reflector
#8 x 3/8" Screws
Notch the Side Reflector
for Reflector Brackets
and Hangers
Side Reflector
Reflector
Side Reflector
Side Reflector
Bracket
Screws to be installed from inside of Side Reflector.
Install screws on one end of the Retainer Clip to allow movement.
Use the hole as a guide to position Side Reflector.
The Side Reflector edge must be visible through
the hole at room temperature.
Side Reflector
Retainer Clip
Note:
Close all chain links "S" hooks, "J" bolts
and turnbuckles or any open connection.
