Series UAG
Page 14
Nov 11, 2015
Installation
H
EATER AND
B
AFFLE
I
NSTALLATION
•
Locate the burner gasket provided and bolt the burner in place on the tube flange with provided
hardware.
Burner must never be installed in a tilted position.
The sense electrode of the burner
cup should be in the 12 o’clock position (Figure 9).
Figure 9: Burner Gasket Installation
Install the baffle at the end of the heat exchanger. The small tab on the baffle is folded over the end of the
tube and clamped in place by the vent connector and vent system, refer to Figure 10.
Figure 10: Baffle Installation
Burner
Assembly
Gasket
Tube
Flange
Note:
Close all open chain links,
and turnbuckles or any open connection.
Note:
Burner MUST NEVER be
tilted sideways.
Only install as shown.
Bend Tab
over End
of Tube
at 6 O'clock
position
Vent
Adapter
Install Baffle
as required in
last section
of tube
Note:
Close all open chain links,
and turnbuckles or any open connection.
