Series UAG
Page 11
Nov 11, 2015
Installation
Figure 4: Suspension Mechanism
•
Install the tube and reflector support hanger on the chain with “Quick Links”, refer to Figure 4 &.
Figure 5. Anchors, Beam Clamps & Eye Bolt must be of minimum 200 pound capacity.
Figure 5: Hanging Points
•
Place the first
(flanged, aluminized)
tube in the first two hangers (Figure 6). Be sure the flange is
toward the intended burner location. The other end of the tube should have the first coupling
already loosely fitted.
Concrete Beam
Turnbuckle
Beam Clamp
24"
Min.
3/8"
Threaded
Rod
I-Beam
I-Beam
12"
Min.
Anchor
Chain link
12"
Min.
Truss
Eye Bolt
Note:
Close all "S" hooks,
chain links, "J" bolts
and turnbuckles or
any open connection.
8' to 9'
10'
10'
Burner
Side
"First Hanger"
Venting
Side
"Last Hanger"
Close all open ended
"S" hooks, chain links
and turnbuckles or any
open connection.
