SuperiorFireplaces.us.com
127035-01K
25
SPECIFICATIONS
VRE4543EN
• Rating (Variable): 25/39,000 Btu/Hr
• Gas Type: Natural Gas
• Ignition: Electronic
• Pressure Manifold Setting: 3.5" W.C.
• Inlet Gas Pressure (in. of water):
Maximum - 10.5" W.C.,
Minimum* - 5.5" W.C.
* For purposes of input adjustment
VRE4543EP
• Rating (Variable): 29/37,000 Btu/Hr
• Gas Type: Propane/LP Gas
• Ignition: Electronic
• Pressure Manifold Setting: 10.5" W.C.
• Inlet Gas Pressure (in. of water):
Maximum - 14" W.C.
Minimum* - 11" W.C.
* For purposes of input adjustment
SERVICE HINTS
When Gas Pressure Is Too Low
• pilot will not stay lit
• burner will have delayed ignition
• fireplace will not produce specified heat
• for propane/LP unit, propane/LP gas supply may be low
You may feel your gas pressure is too low. If so, contact your local
gas supplier.
TECHNICAL SERVICE
You may have further questions about installation, operation, or
troubleshooting. Please contact your IHP dealer for any questions
or concerns. When contacting your dealer please have your model
and serial numbers of your fireplace ready. You can also visit our web
site at SuperiorFireplaces.us.com.
REPLACEMENT PARTS
See
Pages 21 to 24
for a complete replacement parts list. Use only
parts supplied from the manufacturer.
Normally, all parts should be ordered through your IHP distributor
or dealer. Parts will be shipped at prevailing prices at time of order.
When ordering repair parts, always give the following information:
1. The model number of the fireplace.
2. The serial number of the fireplace.
3. The part number.
4. The description of the part.
5. The quantity required.
6. The installation date of the fireplace.
If you encounter any problems or have any questions concerning the
installation or application of this fireplace, please contact your dealer.
IHP
1769 East Lawrence Street
Russellville, AL 35654
Visit us at SuperiorFireplaces.us.com.
ACCESSORIES
Purchase these accessories from your local dealer. If they can not
supply these accessories contact IHP at SuperiorFireplaces.us.com
for information.
Only kits supplied by IHP shall be used in the installation of this
appliance. Use of non-approved accessory/part kit(s) can result in
poor performance and safety hazards.
LINEAR OD. SEE-THRU CONVERSION KIT
Cat No.
Model
Description
F1029
LVSTO
Linear OD. VF See-Thru Conversion Kit
Amber
Green
(standard)
Blue
Clear
GLASS MEDIA
Cat No.
Model
Description
F1097
GP43A
6.0 lb. Bag Smooth Glass Pebbles - Amber
F1098
GP43B
6.0 lb. Bag Smooth Glass Pebbles - Blue
F1099
GP43G
6.0 lb. Bag Smooth Glass Pebbles - Green
F1101
GP43C
6.0 lb. Bag Clear Glass Pebbles
