SuperiorFireplaces.us.com
127119-01C
9
1. Place top surround panel at top of fi replace insert. Bottom edge
of panel will slide under top edge of insert. Align top panel screw
holes with those in insert. Install four #8 Phillips screws, do not
tighten. See
Figure 8
.
2. Align screw holes in side panels with holes in top panel (see
Figure 9). Insert and tighten #8 Phillips screws.
3. Reinstall louver removed in step 4,
Page 8
.
4. Carefully inspect fi replace surround assembly. Make sure each
part fi ts properly. Firmly tighten all screws installed during as-
sembly.
CAUTION: Do not overtighten. Metal can bend,
warp or break under excessive strain.
5. Install trim after fi nal fi nishing and/or painting of wall.
INSTALLATION
Continued
Figure 5 - Removing Screws and Screen
Shipping Screw
(DISCARD)
Screen Mounting Shoulder Screw (4)
(DO NOT DISCARD)
Shipping Screw
(DISCARD)
Figure 6 - Attaching Left Surround Side Panel
Figure 7 - Removing Louver
Surround Side
Screen
Mounting
Shoulder
Screws
(5/16”)
Phillips
Screw
Top Louver
Phillips
Screws
Figure 8 - Attaching Top Surround Panel
Figure 9 - Attaching Side Panels to Top Panel
Top Surround
Panel
Phillips
Screws (4)
Top Edge of Fireplace
Insert
Top Panel
Side
Panel
Phillips Screws
