SuperiorFireplaces.us.com
127119-01C
5
Figure 1 - Log Base Assembly
Figure 2 - Fireplace Insert
PRODUCT IDENTIFICATION
O
F
F
P
IL
OT
O
N
H
I
L
O
Three Piece
Log Set
Remote Selector
Switch (Optional)
Piezo Igniter
Optional
Remote
Control
Control Knobs
Top Louver Assembly
Firebox
Hood
Bottom Louver
Assembly
Screen Assembly
Firebox Support
Top Outer Casing
Blower
Assembly
Gas Line
Access
REMOTE CONTROL ACCESSORIES
There are four optional remote controls that can be purchased sepa-
rately for this fi replace insert:
• wall switch
• wall thermostat
• hand-held ON/OFF remote
• hand-held thermostat remote
See Accessories,
Pages 28-29
.
PRODUCT FEATURES
OPERATION
This vent-free fi replace insert is clean burning. It requires no outside
venting. There is no heat loss out a vent or up a chimney. Heat is
generated by both realistic fl ames and glowing embers. When used
without the blower, the fi replace insert requires no electricity making
it ideal for emergency backup heat.
SAFETY DEVICE
This fi replace insert has a pilot with an Oxygen Depletion Sensing
(ODS) safety shutoff system. The ODS/pilot is a required feature for
vent-free room heaters. The ODS system shuts off the fi replace insert
if there is not enough fresh air.
PIEZO IGNITION SYSTEM
This fi replace insert has a piezo igniter. This system requires no
matches, batteries or other sources to light fi replace insert.
BLOWER ASSEMBLY
This fi replace insert is equipped with a blower assembly. The blower
operates thermostatically and has a variable control. The blower
circulates heated air from the fi replace insert into the room. Use of
blower is optional.
