Operation
900683-01F, 10/2018
Innovative Hearth Products
DRT3500 Series Direct-Vent Gas Fireplaces
57
Installing the DRT3540 and DRT3545 Series Charred Oak Logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE: Do not cover the burner ports.
Log Number
Description
1
Left Rear Log
2
Rear Log
3
Front Right Log
4
Top Front Right Log
5
Top Front Left Log
Catalog number for the entire set: See Page 69 for ordering
information
Table 31 - Charred Oak Log Set
Figure 50 - Place log #1
Figure 51 - Place log #2
1
2
3. Align the notches in the left rear log (1) with the left rear locating tab (Figures 49 and 50).
4. Position the Rear Log (2) on the left front and right rear placement locating tabs (Figures 49 and 51).
Figure 49B - Locate log placement tabs, 45”
1. If necessary, remove the glass door (Pages 59-60). Locate the placement tabs (Figure 49A or 49B).
2. Bend up the log placement tabs (Figure 49A or 49B). Place glowing embers (Figure 49A).
3
2
5
4
1
Tab for
Log #1
Tab for
Log #2
Tab for
Log #2
40” Models
45” Models
Tab for
Log #1
Tab for
Log #2
Tab for
Log #2
Tab for
Log #3
Do not place
embers over
the big slots
Place Glowing Embers
Figure 49 - Locate log placement tabs, 40”
Figure 49A
