Operation
900683-01F, 10/2018
Innovative Hearth Products
DRT3500 Series Direct-Vent Gas Fireplaces
55
Installing the DRT3535 Series Charred Oak Logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE: Do not cover the burner ports.
Log Number
Description
1
Left Rear Log
2
Rear Log
3
Top Front Right Log
4
Top Front Left Log
Catalog number for the entire set: See Page 69 for ordering
information
3
4
2
1
1. If necessary, remove the glass door (Pages 59-60). Locate the placement tabs (Figure 44).
2. Bend up the log placement tabs (Figure 44). Place glowing embers (Figure 44).
Place Glowing Embers
Tab for
Log #1
Tab for
Log #2
Log Location Tabs
Tab for
Log #2
1
2
Pin for
Log #3
3
Landing area for Log #4
Table 30 - Charred Oak Log Set
Figure 44 - Locate the log placement tabs
Figure 45 - Place log #1
Figure 46 - Place log #2
Figure 47 - Place log #3
3. Position the Rear Log (2) on the left front and right rear placement locating tabs (Figures 44 and 46).
4. Position the top front right log (3), as shown in Figure 47 on the locating pin outlined in Figure 46.
Do not place
embers over
the big slots
