SuperFlow AutoDyn, Operator'S Manual

Page: 80 / 208

H
A N D H E L D
C
O N T R O L L E R
Section 7 - Page 5
7.1. Operator interface controls
“STOP” returns to “start menu”, stops running tests,
(K key on front panel) removes load from the absorber, aborts all
menu actions without saving.
“RECORD” records one data line for each time it is pressed.
(L key on front panel)
“DISPLAY” alternates the current data screens display of
(M key on front panel) units, channel number, measured values.
“PRINT” Prints a saved test
“TOGGLE” toggles between normal operation and load
(N key on front panel) control command line.
, , , data entry keys.
“CLEAR” clears last keystroke entered in an input field.
“ENTER” confirms data entry in an input field.
7.2. Operator Interface display menus
This section describes the menus displayed by the“Autodyn“
system configuration.
7.2.1. System power-up choices
System power-up screen (this screen displays at system
power-up and whenever the softkey sequence F-A-D-E is
pressed)