SuperFlow AutoDyn, Operator'S Manual

Page: 48 / 208

I
N S T A L L A T I O N
Section 5 - Page 11
5.1.9. Pressure Connections
The Sensor Box has inputs, depending on configuration, for oil pres-
sure, manifold air pressure, and inlet air pressure. Simply connect the #4
hose to the appropriate pressure.
5.1.10. Optical Wheel Tach Connection
An Optical Wheel Tach sensor can be installed to read rear
wheel slippage. The sensor plugs into the 1200A-1936 Sensor
Box Connector Panel. Be sure to have the power turned OFF
before plugging in the connector. Insert the connector into the
yellow receptacle. Apply a small piece of the supplied reflec-
tive surface tape to the rear wheel. Mount the optical pickup
rigidly so that you can receive a good signal. Shield the tape
from bright ambient light.
5.1.11. Ignition Pick-up Connection
The ignition pick-up plugs into the 1200A-1936 Sensor Box
Connector Panel. Be sure to have the power turned OFF before
plugging in the connector. Insert the connector into the
upper
green receptacle.