SuperFlow AutoDyn, Operator'S Manual

Page: 49 / 208

M a n u a l
AutoDyn
Section 5 - Page 12
AutoDyn manual Section 5. PM7, 5/2004
5.1.12. Air and Fuel Sensor Connection
Air flow and fuel flow measurement turbines can be connected to the
1200A-1936 Sensor Box Connector Panel. Be sure to have the power
turned OFF before plugging in the connector. A Y-cable is used to allow
connection of the standard sensor AMP plugs to the connector panel.
Insert the connector into the
red receptacle.
5.1.13. Remote Switch, Aux 1, Aux 2, Aux 3, and Control Inputs Connections
These receptacles ( black, gray, lower blue, white, and lower green ) are
not used in the standard version of the AutoDyn dynamometer.
5.2. Configuration
5.2.1. Computer Communication
The Sensor Box communicates with a computer using a LAN connec-
tion. This is an acronym for Local Area Network. This is an Ethernet
network connection and you will need a network card in your personal
computer.