Delete Memory - Press C key to toggle
between a flashing “dEL” for memory
deletion or a non-flashing “dEL”. If you
want to delete all memory, press M key while
the “dEL” is flashing. If you do not want to
delete all memory, press M key when the
“dEL” is not flashing. Once the M key is
pressed, the LCD display will move to the
setting of voice volume setting mode. You
will see the display of “VoL” in the center of
screen. (When the “dEL” is flashing on the
screen, and you will hear:
“Ready to delete
memory records.”
)
7.
8. Set the Voice Volume - Press C key to toggle
between the selection of speaking mode and
non-speaking mode. If you want to turn off
the speaker, press M key when the screen
does not show the small speaker icon. You
will hear:
“Voice Off.”
If you see a small
speaker icon appears below the battery icon
on the right side of LCD screen, you can
press M key to turn on the speaker. Then you
will see the existing voice volume level at
the lower right corner of the screen. There
are 7 levels of voice volume. You can press C key to adjust the voice
level and then press the M key to confirm the setting.
(There will be
a “beep” sound to indicate the level of voice volume adjusted.)
The meter will turn off automatically after 2 seconds with a display
of “OFF”, and you will hear:
“Goodbye.”
8
15
7