9.Running a Control Solution Test
IMPORTANT:
Always make sure you press C key for Control Solution test,
otherwise the control solution test result will be stored in the
memory, and affect your
“
AVG
”
results
.
2.Press the C key, and the meter will
display a letter “C” on the upper right
corner of screen, indicating the control
test mode. You will hear:
“Apply Control
Solution now.”
The test result will not be
stored in the memory.
3.Squeeze a small amount of Control
Solution on a flat surface and apply to
the front edge of the test strip, and you
will hear:
“Testing in process.”
4.Wait for 6 seconds, and the meter will
display the result. You will hear:
“The
glucose level is
number/unit.
”
5.Remove the used strips by hand or by
pushing the ejector and the meter will
power off with a display of “OFF” on the
screen. You
will hear:
“Goodbye.”
1.Insert a strip into the meter, and you
will hear:
“Hello, the Meter is ready.”
A blinking blood icon will be displayed
on the screen. You will hear:
“Apply
blood now.”
1
2
3
4
5
17