7. Installing the battery
1.Turn off the meter by pressing the
“M” button and hold for 2 seconds
before replacing the batteries.
Slide down the battery cover on
the back of the meter by pushing
the cover in the direction of the
arrow and put the cover aside.
2
.
Remove the two used
batteries
.
3.Insert 2 new batteries with
correct
＋
/
－
direction
.
(
Battery
:
AAA 1.5V 2 Alkaline 24A LR03
)
4.Put the battery cover back in
place by pushing the cover in the
opposite direction of the arrow to
close the cover into position.
11
Note:
1.It is suggested that batteries need to be
replaced when the battery icon appears
empty. If you keep using the meter, the
battery icon will start flashing and an error
message E_3 will appear on the screen.
2.Note that replacing the battery will not
reset the stored testing results
.
3.You need to reset the time and date after
the batteries are replaced.
4.If there is any unexpected symbol on the
display, please follow the above procedure
to replace the batteries again.
5.Please dispose of batteries according
to your local ordinances.
1
2
3
4
