9.Apply a small blood drop to the
front edge of the test strip, and the
blood should be pulled into the
confirmation window before
the meter begins to count down.
Do not push your finger against the
test strip or try to apply a smeared
blood sample.
You will hear:
“Testing in process.”
10.The meter will start counting
down for 6 seconds and your test
result will be displayed on the
screen. Remove the used test strip
by hand or by pushing the ejector
button. The meter will turn off and
the test result is stored auto-
matically.
You will hear:
“The glucose level is
number/unit
.”
and
“Goodbye.”
when meter turns off.
Important:
1. Never reuse a test strip
An “E_5” error
message will be displayed in the center of screen if a
used strip is inserted into the meter. (You will hear:
“The strip is wet or used.”
)
2. Discard the test strip and lancet immediately in a
puncture-proof container with a lid after use .
or a lancet
.
9
10
21
