1. To display the average (AVG) test result, please turn the meter
off. Press C and M keys at the same time and hold for about 2
seconds, wait for the AVG to be displayed on the screen, then
release the two buttons. The meter will be in the average mode
with “AVG” font displayed.
2.When the “AVG” is flashing at the lower left corner of the
screen, the number 7 will be displayed under AVG and the
average of the last 7 days test results will be displayed in the
center of the screen.
The number of tests completed in the last 7 days
will also be displayed in the lower right hand corner of the screen.
If you want to see the average of 14, 28, 60 and 90 days, keep
pressing the M key to move the LCD display forward from 7
day average to 90 day average. The average display will move
from 90 days backward to 7 days if you continue to press C
key. You will hear:
“The average for 7 day is
number/unit
.”
3.Press the M key and hold for only 2 seconds to exit the recall
mode and turn off the meter, or the meter will automatically
power off after 60 seconds. You will hear:
“Goodbye.”
4.When “---” is displayed, showing that there are no test results
in the memory. You will hear:
“Zero memory.”
Calculations:
The 7 days average is the average of the last 7 day test results.
The 14 days average is the average of last 14 day test results.
The 28 days average is the average of last 28 day test results.
The 60 days average is the average of last 60 day test results.
The 90 days average is the average of last 90 day test results.
Note:
1.HI/LO results are not stored in the memory.
2.Do not insert the strip into the meter when you want to recall
the test results.
C. Viewing the Average (AVG) of Test Data in Memory
23
