Super Superserver 5038ML-H24TRF, User Manual

Page: 66 / 108

6-4
S
UPER
S
ERVER 5038ML-H24TRF User's Manual
6-4 Removing and Installing Sleds
Figure 6-3. Removing/Installing a Sled
The system features twelve removable sleds. Each sled contains an individual
motherboard and hard drives. The sleds allow the motherboards/nodes to easily
be installed and removed from the chassis.
Removing Sleds from the System
1. Power-down the two nodes on a sled by pressing the nodes' power buttons.
2. Press and hold down the release tab on the back of the sled.
3. Use the sled's handle to pull the it from the system.
Warning: Except for short periods of time while swapping sleds, do not operate the
server with the sled bays empty. In the event of a node failure, remove the sled of
the failed node and replace it with a dummy node that was included with the system.
Release Tab
Handle