SC809 Chassis Manual
5-10
Checking the Server's Air Flow
Make sure there are no objects to obstruct airflow in and out of the server. In
1.
addition, if you are using a front bezel, make sure the bezel's filter is replaced
periodically.
Do not operate the server without drives or drive trays in the drive bays. Use
2.
only recommended server parts.
Make sure that no wires or foreign objects obstruct air flow through the chas
-
3.
sis. Pull all excess cabling out of the airflow path or use shorter cables. The
control panel LEDs inform you of the system status. See “Chapter 3 System
Interface” for details on the LEDs and the control panel buttons.
Installation Complete
In most cases, the chassis power supply and fans are pre-installed. If you need to
install fans continue to the Systems Fan section at the end of this chapter. If the
chassis will be installed into a rack, continue to the next chapter for rack installa-
tion instructions.
5-6 Checking the Air Flow
