34
5.4.4.2
Furthermore, the scanner can be recessed into the contours of a machine. The recess
can have a depth of up to 40mm without the mounting system
MS-SD3-1
, or up to 65mm
with the mounting system
MS-SD3-1
. This is in reference to detection zones that cover an
angle range of 180°. If it is not possible to comply with these values, or if unmonitored
zones result due to the shape or movement of the machine, additional safety measures
must be taken.
The effectiveness of the detection zones can be optimized by changing the depth at
which the scanner is installed, or by adjusting the angle range (e.g. from 180° to 190°).
For information on how to configure the scanner in this way, please refer to the instruction
manual (software operation) for the
SD3SOFT
.
Fig. 5.4-2:
Recessed installation within the machine contour
If it is not possible to mount the
SD3-A1
directly onto the machine, it can also be
positioned lateral to or across from the machine.
Recessed installation within the machine contour
Summary of Contents for SD3-A1
