SunTech ADC ADview 9000BP, User Manual, Page: 36 / 80

25
ME ME ME MEASURING TEMPERATURE WITH THE ASURING TEMPERATURE WITH THE ASURING TEMPERATURE WITH THE ASURING TEMPERATURE WITH THE
ADVIEW ADVIEW ADVIEW ADVIEW
Your
ADview
device can measure temperature with the optional temperature module. This
module enables you to take rapid, accurate temperature measurements ranging from 86°F-
109.4°F. Typically, predictive readings are obtained within ten to fifteen seconds, and direct
readings within two minutes. The module is equipped with the temperature probe for
oral/axillary measurement, color-coded blue. A rectal probe that is color-coded red is
optionally available.
Temperature Units of Measurement
The device displays the temperature measurement in
:
•
Celsius
•
Fahrenheit
To choose a unit of measurement, depress the recessed button on the left side of the
temperature module. The icon for the selected unit is illuminated. This is now the default
selection.
Temperature Measurement Modes
The device can measure temperature via three modes:
•
Oral, indicated by on the display and measured using the blue probe
•
Axillary, indicated by on the display and measured using the blue probe
•
Rectal, indicated by on the display and measured using the red probe
All three modes can be used for both predictive and direct measurement. In the default
predictive mode, your
ADview predicts temperature in 10-15 seconds with an accuracy of +/-
0.2 °F (+/- 0.1°C). When a fever is detected, the measurement may last longer. In direct mode,
the display continually updates until a stable reading is reached. This mode is used in certain
difficult conditions when a predictive reading is not preferred or possible.
Axillary and rectal modes are preferred for children and compromised
patients.
Using temperature probe and probe covers
In addition to the safety instructions for your
ADview
, here are some additional tips on using
the probe and probe covers for the optional temperature module:
•
Use only ADC by SunTech supplied probe covers with this device.
•
The device and probe covers are non-sterile. Do not use on abraded tissue.