SunTech ADC ADview 9000BP, User Manual, Page: 15 / 80

4
Buttons
The buttons are used for all actions on the interface, and provide tactile feedback when
pressed.
Buttons on the main BP module
Button Functionality for the BP Module Button Functionality for the BP Module Button Functionality for the BP Module Button Functionality for the BP Module
Button
Button Button
Button Device Status
Device Status Device Status
Device Status Action
Action Action
Action Result
Result Result
Result
Select for less than 2
seconds Start an automatic BP Start an automatic BP Start an automatic BP Start an automatic BP
measurement.
measurement. measurement.
measurement.
Select for 2 to 5
seconds Redisplay last measurement values
for all modules.
Idle
Select for more than 5
seconds Clear last measurement values for
all modules.
Taking an
automatic or
Sphygmode BP Select Aborts the BP measurement in Aborts the BP measurement in Aborts the BP measurement in Aborts the BP measurement in
progress.
progress. progress. progress.
Automatic
In Calibration
Check mode Select Device exits Calibration Check
mode and is ready to take
measurements.
Idle Select Inflates the cuff as long as the Inflates the cuff as long as the Inflates the cuff as long as the Inflates the cuff as long as the
button is selected.
button is selected. button is selected. button is selected.
Taking a
Sphygmode BP Select Re-inflates the cuff as long as the
button is selected.
Taking an
automatic BP Select Aborts the BP measurement in
progress.
Sphygmode
Manual
In Calibration
Check mode Select Device exits Calibration Check
mode and is ready to take
measurements.
Power off Select Turns on the device.
Turns on the device. Turns on the device.
Turns on the device.
Power
Power on Select Turns off the device. Turns off the device. Turns off the device. Turns off the device.
Aut
Power Power off Hold the Automatic
button down while
selecting the Power
button. Device enters the Calibration
Check mode.