SunSynk SUNSYNK MAX, User Manual

Page: 69 / 71

MAX | User Manual 69
APPENDIX B
Inverters sold in Australia will be set to the Default Australian standards
APPENDIX C
The Sunsynk Max is compatible with the SolarMan app, via a Wifi or GSM data logger (See SolarMan instruc-
tion manual).
APPENDIX D
If an external Residual Current Device (RCD) is used it should be of Type A/AC with a tripping current of 30mA
or higher.
Use of RCDs
Residual Current Devices (RCDs): An RCD dedicated for an Inverter Energy System (IES) may be used to meet
the mechanical cable protection requirements of AS/NZS3000 for the cable from the switchboard to the IES.
If an RCD is installed the engineer must:
1. Disconnect all live conductors (including both active and neutral conductors) and
2.
Be of the type specified in the inverter manufacturer’s instructions or as labelled on the inverter.
We recommend the use of an RCD on all circuits and sub-circuits connected to the Sunsynk Inverter. Below
is the specifications for a Residual Current Breaker with Overcurrent Protection (RCBO)
Protocol Description
CAN
Pin 4: CAN-H
Pin 5: CAN-L
Pin 1, 2, 3, 6, 7, 8: NC
RS485
Pin 1: RS485B
Pin 2: RS485A
Pin 3, 6: GND
Pin 7: RS485A
Pin 8: RS485B
Pin 4, 5: NC
RS232
Pin 3: BMS transmit; Computer receiver
Pin 4: BMS receiver; Computer transmit
Pin 5: GND
Pin 1, 2, 6: NC
The following table is the connection on inverter side :