SunSynk SUNSYNK MAX, User Manual

Page: 40 / 71

MAX | User Manual 40
5.11. Generator & Battery Page
To configure battery charging settings, click on the BATTERY icon and then on ‘Batt Charge’.
What this page displays:
ƒ
Generator start voltage/SOC %.
ƒ
Grid power start voltage/SOC %.
ƒ
Float V is the voltage at which a battery is maintained after being fully charged.
ƒ
Absorption V the level of charge that can be applied without overheating the battery.
ƒ
Float V for an AGM battery is 55.20V.
ƒ
Absorption V is for an AGM battery is 57.60V.
ƒ
Equalization V for an AGM battery is 58.80V.
ƒ
Equalizing charge/overcharge to remove sulphate crystals that build-up on the plates over time on
lead-acid batteries.
What you can do from this page:
ƒ
Tick ‘Gen Charge’ to charge the batteries from the gen I/P.
ƒ
Tick ‘Grid Charge’ to charge the batteries from the grid I/P.
ƒ
Tick ‘Gen Signal’ signal to auto-switch a relay box.
ƒ
Tick ‘Grid Signal’ signal to auto-switch a relay box.
ƒ
BMS setting.
ƒ
Active battery - This feature will help recover a battery that is 100% discharged by slowly changing from
the solar array. Until the battery reaches a point where it can change normally.