FORM NO. 660868 REV. B
PAGE 25
Steps:
1. Activate
SwiftShield™
arms forward, to 12 o’clock position (straight up).
2. Pull
SwiftShield™
cover all the way forward and fit the “Mitt’ over bow of boat.
3-D
Fitting the Cover over Bow
3-E
Attach Guide Ropes
1.
2.
Steps:
1. Feed guide ropes through holes in bow sprit
pipe. Tie stopper knot.
2. Attach guide ropes to D-rings on
SwiftShield™
cover straps with carabineer.
3. Carefully bring
SwiftShield™
arm to full aft po-
sition.
4. Guide ropes should be slightly slack when cover
is fully fitted and arm
is in full aft position.
5. If cover does not pop over shoulder of rub rail,
tighten guide ropes.
6.
If ‘Mitt’ size is too large:
Lengthen the guide ropes
Lengthen the bow sprit
Lower the roller in forward position
7.
If the cover ‘shoulders’ do not ‘pop’ over the rub
rail when the arms are aft. - Tighten the guide
ropes.
8.
To reduce the “Mitt” size, extend bow sprit for-
ward.
Guide Ropes