5-17
■
■
DISK IN
①
Press the acryl cover of the disk drive to open (as shown in the left picture of [Fig.5-23].
②
Insert the floppy disk into the drive in the direction shown in the right picture of [Fig.5-23]
■
■
DISK OUT
Press the Disk OUT button to take the disk out from the drive (see [Fig.5-23]).
5-11) IN AND OUT OF DESIGNS
You can use a floppy disk or a tape reader to read a design into the SWF machine. You can write the design onto the
floppy disks.
5-12) RETURN TO PREVIOUS LOCATION UNEXPECTED BLACKOUTS
Your SWF machine goes back to the location of stop to pick up stitching when the power comes back on after
unexpected blackouts.
[Fig.5-23]
[CAUTION]
Do NOT remove a disk from the drive while formatting, reading, or writing the disk. Otherwise the data in the
disk may be lost.
[CAUTION]
Make sure to turn OFF the power in unexpected blackouts until the power comes back on.
