5-5
③
For forward non-stitching (during machine stop)
Refer to p.7-10 for floating functions during machine stop.
④
For backward non-stitching (during machine stop)
⑤
For work other than embroidery
If you want to perform a solenoid test, a thread break sensor test, or manual trimming, do as follows:
Push to left
Hold to left
Push to right
Frame moves backward in selected movement units (see Note 2)
Frame starts to move backward .
If you release the switch before the machine goes 10 of the selected
stitches, the machine will stop immediately (the machine moves back in
the selected movement units). If you release after the machine traveled
10 of the selected stitches, the machine will continue to move backward .
Push to right and the machine will stop moving backward .
MACHINE OPERATION
Select the desired function
�
push the bar switch to right
[CAUTION]
[NOTE 1]
“
Inching
”
refers to low-speed embroidery at a 100 rpm range, performed for stable
stitching when the machine is re-started after stop.
[NOTE 2]
“
Frame movement unit
”
refers to the
“
BK STITCH UNIT
”
in
“
SET-UP 1.
”
You can select
from 1 to 10 stitches (in the unit of 1 stitch).
BUTTON OPERATION
Push to right
Hold to right
Push to left
Frame moves forward in selected movement units (see Note 2)
Frame starts to move forward.
If you release the switch before the machine goes 10 of the selected
stitches, the machine will stop immediately (the machine moves forward
in the selected movement units). If you release after the machine traveled
10 of the selected stitches, the machine will continue to move forward.
Push to left and the machine will stop moving forward.
MACHINE OPERATION
BUTTON OPERATION
