Shenzhen SUNSKY Technology Limited
25
When camera alarm, user can’t receive MMS, but only can receive a SMS “
*** alarm, image
quantity 5
”.
Send MMS when alarm
(Default):
#12#1#
After successful set, camera will reply “Set alarm with MMS successfully”. User can receive
MMS images when camera alarm.
No calling when alarm
(Default):
#13#0#
After successful set, camera will reply “Set alarm without calling successfully”
Calling when alarm
:
#13#1#
After successful set, camera will reply “Set alarm with calling successfully”. Once alarm, it will
call master and family numbers orderly until someone answer the calling. It will automatic dial
three times, and exit if no one answer.
If set alarm with SMS, MMS and calling, it will send SMS firstly, then send MMS, and make
calling at last. Each alarm method only work one time.
Not send MMS image to e-mail
(Default)
:
#110#0#
After successful set, camera will reply “Set alarm without MMS image to e-mail successfully”.
Send MMS image to e-mail
:
#110#1#
After successful set, camera will reply “Set alarm sending MMS image to e-mail successfully”.
If user set alarm with MMS also, it will send MMS image to mobile phone at first and then to
e-mail when alarm.
Image quantity when alarm
:
#33#quantity#
Quantity should be the number from 2 to 8. The default number is 5.
Note:
1) MMS file name:
Wireless sensor alarm: Model-Time (Sensor name), such as -171154(Sensor 1).
Motion detection alarm: Model-Time (Motion detection), such as -171154 (motion
detection)
2) Image quantity: is same as pre-set image quantity when alarm, default setting
is 5.
3) Image size: first two images is 160×128, others are same as pre-setting. If
image size is 640×480, only two additional images can be taken except two
fixed size images.
4) Image capture interval: first two images is 500 ms, others same as pre-setting.
Refer “Chapter 5. Advanced operation, 17. Capture image interval”
