Shenzhen SUNSKY Technology Limited
12
GSM network signal strength may affect the image and live voice quality and MMS
transmission speed, therefore, the camera should be located at the place where has
strong network signal.
After installation, try to take several images and send to mobile to check the image
quality, Re-locate the remote camera and adjust the host’s angle to get best image.
Chapter 4 Quick Start
About the SMS Command:
1
）
All the SMS commands are composed with symbol # and Arabic numerals.
2
）
Master & family SMS command format:
#code#content#
.
3
）
Guest SMS command format:
#code#password#content#
.
4
）
Password is a four-digit number. The default is 1234.
5
）
The maximum digit of the phone number is 16.
6
）
Camera will reply you after received the SMS command.
Note: The symbol “#” in SMS command.can not be ignore. No space character can be
included within the commands.
1. Power
on/
off
Power on: turn the power switch to upside “On” position. The indicator will be light constantly
with red color for 3-5 seconds, then change to flash slowly, After about 35 seconds, the
indicator change to green color flashed slowly (indicated cancel defense status) or green color
lighted constantly (indicated set defense status), which indicated that the camera search the
network and begun to work. A “Di…” tone can be heard from the camera. More information of
the status, please refers to indicator status instruction.
Power off: Turn the power switch to downside “Off” position.
2. Start Remote camera
Method 1: Call remote camera with your mobile, the call will be hung up after connected,
which indicated that your mobile number has been recognized as master.
Method 2: Edit and send the following SMS to camera:
#00#
After initiation, the camera will send the following SMS to your mobile: “Welcome to use
remote camera, the password is 1234”.
