Shenzhen SUNSKY Technology Limited
24
After successful set, it will reply: “Email address ***** has been changed successfully.”. The
e-mail address should be exact. Master and family can set one e-mail to one number. If more
than one e-mail set for one number, only the last one can be recognized.
If the SMS command of add or modify e-mail not including e-mail parameter, camera will reply
“Invalid format”.
Delete e-mail
:
#109#
After successful set, it will reply “Delete email successfully”. Only master can operate this
function. All e-mail will be deleted after receive this SMS command.
Note: If this SMS command including e-mail parameter, it will reply “No need e-mail
parameter”.
When master or family require images to e-mail, camera will send the MMS images to pre-set
e-mail.
When set “Alarm send MMS images to e-mail” (Refer Chapter 5. Advanced operation, 15.
Automatic alarm), it will send MMS images to e-mail when alarm.
15. Automatic alarm
Remote camera can alarm by motion detection, wireless sensor or by pressing the
emergency key in remote control. The previous two ways are activated automatically. The
default alarm way is sending SMS and MMS.
Master or families send following SMS command to set the automatic alarm method:
(Authority: Master, Family)
Warning tone when alarm:
For master and families: #130#1#
For guest: #130#password#1#
After successful set, the camera will sound “Di…” tone when alarming.
No warning tone when alarm (Default):
Master and families send SMS: #130#0#
Not send SMS when alarm
:
#11#0#
After successful set, camera will reply “Set alarm without SMS successfully”
Send SMS when alarm
(Default):
#11#1#
After successful set, camera will reply “Set alarm with SMS successfully”
Not send MMS when alarm
:
#12#0#
After successful set, camera will reply “
Set alarm without MMS successfully, alarm with SMS
”.
