Shenzhen SUNSKY Technology Limited
20
Default defense status:
Infrared light turn on, send MMS when alarm, motion detection
activated, MMS image quality is QVGA, send 5 images when alarm.
9. Cancel
defense
(Authority: Master, Family)
In cancel defense status, camera won’t make any alarm (Unless press the emergency key in
the remote control).
All connected wireless sensor and motion detection didn’t work.
Method 1: send following SMS command to camera:
Master and family edit
：
#02#
Method 2: press the key of “Cancel defense” on the remote control. You can hear “Di…” tone if
operation successful. and receive “Defense mode de-activated” SMS. Then the indicator
display in flash green light.
10. Wireless sensor
(Authority: Master, Family)
Any 315MHz(or 433MHz) wireless sensor, such as infrared body sensor, wireless door
magnet, wireless smoke sensor etc, can be set as alarm sensor of the camera.
Add wireless sensor:
1
）
Power on the wireless sensor.
2
）
Master or family send following SMS command to camera. the camera enter the
receive wireless sensor status:
#05#sensor description#
“Sensor description” is used for identify the sensors. Only character or number with max
20-digits can be used.
For example
：
#05#door# or #05#1#
If send SMS with #05# only but without sensor description, camera will default recognize
the sensor with its order number.
3
）
After receive the SMS command, camera will sound “Di…” tone and the indicator
flash with red and green alternately. When received “Waiting to load sensor, make the
sensor work immediately” SMS, please make wireless sensor work immediately. For
example, for wireless door magnet, make it open and close once to send the signal to
the camera. Once the sensor loading successfully, the camera will sound “Di…” tone,
exit the loading status, and reply “Loading sensor successfully”.
4
）
In loading status, press the set key at the back of the camera, the camera will sound
