- 10 -
SXJS3018 DOUBLE-DECK SCISSOR LIFT
Chapter 7. Maintenance
7.1 Keep the facility clean and tidy. Nothing is permitted to put on the flat and
the below of the facility to avoid damage to the equipments and hurt to people
caused by the decline and extrusion during lifting and falling.
7.2 Maintain the control panel dry and clean. Avoid the dust to fall into the
electromagnetic valve and the hydraulic oil box, and damage the hydraulic oil
box and electric components.
7.3 Nothing is permitted to place on the operation panel in case misacting and
damage of the press button and indicator light.
7.4 Keep the hydraulic pressure, pneumatics, pipeline and connection clean in
case the pipelines aging and dilapidate.
7.5 Change the hydraulic oil after used for 3 months. Then change the
hydraulic oil according to the times of using longest 2 years. Release the used
oil thoroughly. Clean the oil tank and oil filter. Fill in enough oil. Check the oil
level regularly. Do not let anything dirt falls in the oil tank in case the oil pump is
damaged.
7.6 Clean the oil filter every 3 months. Use the kerosene to clean and the brush
to clean the dirty things. Pay attention to not damage the oil filter and change it
once find damage.
7.7 Check and clean the pneumatic two-component filter regularly. Any dirt
found need to be cleaned in time.
7.8 Check the status of the screws for every cardinal axis every half month.
Check the status of the cardinal axis.
7.9 Grease must be added one time every half month to every oil filling cup.
7.10 Keep the idler wheel and the moving parts of the sliding block clean and
add grease regularly.
7.11 Change the lift sliding block one time every year. Change the lift sliding
block in time if the equipment are used very often.
7.12 Clean the area around the lift after work every day to keep the lift clean.
