28
Q400/Q500/Q700 F/R Rev.A
1
A
Removal of brake from motor assembly
Preparation
Note!
Switch off the wheelchair via remote control
Instructions
Note!
Suitable work area required!
•
Follow the illustrated instruction for the brake from the
motor assembly.
•
In order to complete this, you must first tilt back chair,
remove the battery cover and electrically disconnect the
power
•
Please remove brake lever first in order to remove the
brake.
Tools used
3
NOTE: This applies to the 4-pole motors and the 2-pole performance
motors.
Fig. 6.2.32
1.
Unscrew and remove 3 (A) bolts from the main brake cover using
the crosshead screwdriver (Please re-tighten by hand)
Fig. 6.2.33
2.
Remove main brake cover (B) from motor
NOTE: Disconnect electrical connector after main brake cover has
been removed
Fig. 6.2.34
3.
Unscrew and remove 4 (C) bolts
Tightening torque for (C) bolts is 3Nm
2
B
3
C
C
Fig. 6.2.32
Fig. 6.2.33
Fig. 6.2.34
