JAY Positioning Supports
EU=Rev.1.0
15
ENGLISH
INSTALLATION
SAFETY CHECK
Once the installation is finished, carry out the following
checks to ensure that the user is appropriately and safely
positioned.
If possible, ask the user to lean forward and to the sides to
test the fit.
Check that:
1. The buckles and adjustment straps are operating
properly.
2. The user sits comfortably in the seating and the
harness.
3. The harness is not too low or too high. The support
must not rub or cut into the users neck.
4. The mounting hardware is not interfering with any other
positioning accessories/devices on the wheelchair.
5. Adjust the harness if necessary.
• Harness Too High, (Fig.22.0).
• Harness Too Low, (Fig.23.0).
• Harness Fitted Correctly, (Fig.24.0).
Fig. 22.0
Fig. 23.0
Fig. 24.0
