930583 Rev. D
36
E n g l i s h
X I I . M a i n t e n a n c e
H. ORDERING PARTS
When you order parts, provide the following:
1. Model of chair
2. Serial number of chair
3. Left hand or right hand control
4. Part number, description and quantity of parts you need.
5. State reason for replacement.
I. MAINTENANCE CHART
You should check the items on this chart at the indicated intervals. If any of the items are
loose, worn, bent or distorted, immediately have them checked and/or repaired by your
authorized Sunrise supplier. Frequent maintenance and servicing will improve performance
and extend wheelchair life, and help prevent injuries.
TOOLS YOU WILL NEED
1. Basic Tool Kit:
To set-up, adjust and maintain your chair you will need the following tools:
• 3mm Allen Wrench
• 13mm Socket Wrench
• 5mm Allen Wrench
• 16mm Open-end Wrench
• 6mm Allen Wrench
• 19mm Open-end Wrench
• 8mm Allen Wrench
• Flat Head Screwdriver
• 13mm Open-end Wrench
• Standard Tools
• Phillips screwdriver #2
• Tire Pressure Gauge
• 17mm Socket Wrench
You can obtain a multi-purpose tool kit from Sunrise, or buy the tools you need from a hardware store.
2. Torque Wrench:
If you plan to adjust and maintain this chair yourself, Sunrise recommends that you use a
torque wrench.
NOTE–
The wrench must measure inch-pounds. You can buy a torque wrench and proper sockets from a
hardware store.
Charge batteries
3
Check tires for proper inflation level
3
Check batteries for proper electrolyte level (wet cell only)
3
Check plugs and connectors for proper connections
3
Check all moving parts for wear
3
Inspect all nuts, bolts and fasteners for looseness or wear
3
Inspect upholstery for wear & tighten seat sling as needed
3
Remove and inspect motor brushes
3
Service by authorized supplier
3
Daily
W
eekly
M
on
thly
Qu
arterly
Ann
u
ally
CHECK...
