• The SunQuest Super V6000 VHO must be installed in a room with a
minimum ceiling height of eight (8) feet. Place your booth no closer than
6" from any wall.
• Proper assembly of your booth requires three people. Plan to have a
couple of helpers assist you.
• Record the serial number of the booth in the area provided on the
back page of this manual. This information will be required whenever you
call customer service.
2
Installation-Pre-Installation Planning
Assembly
1.
Each of the unit’s halves should be placed together at the desired installation loca-
tion. Align the holes (A), located at the top and bottom of the unit
.
Remove the ship-
ping bars which are located at the top of the unit connecting the door to the back of
the unit.
Caution:
Once the shipping bars are removed, the halves can easily fall over.
Minimize this risk by keeping the door panels in the same positions as they were
before removing the shipping bars and then immediately connect the halves.
With the holes aligned, secure the two halves of the unit to one another using the
four (5/16x3/4 Hex Head) bolts. Secure them using the nuts provided. Do not tighten
them at this time.
A
Back of unit
B
