Solution
Problem
1. Make sure the unit is connect to a power source.
2. Check source of ac power. Reset circuit breaker or
replace fuse.
1.ComputaTAN™ or T-Max
®
Manager remote system has
not yet been set.
1.Bypass plug is not installed see
making electrical con-
nections.
2.If remote is being used other than ComputaTAN™ or T-
Max
®
Manager, remote wiring is incorrect, see the
instructions provided with the remote interface kit.
The auto start feature of the remote system is disabled,
see the instructions provided with your remote system.
1.The booth must first be set to a unique address see
remote connections.
2.The bypass or terminator plug may be installed in the
series in an inappropriate location. Plug the bypass plug
only into the booth at the end of the series.
Lamps fail to light and timer
display is blank
Timer display continues to
show a 0 after the timer button
is pressed
Timer display changes to indi-
cate a tanning time after the
timer button is pressed but
lamps do not come on
My booth is connected to the
ComputaTan™ or T-Max
®
Manager remote system and
when the delay time has
expired the timer display starts
counting down but the booth
lights do not come on
My booth won’t work with the
ComputaTan™ or T-max
®
Manager remote systems
12
roubleshooting
T
Problem/Solution Chart
