Serial Flash Programmer[S550-SFWv3] Operation Manual
74
⑦
Edit data
・
Data is editable by clicking the “Edit” button, “Set ID” button, “Set Block” button” and/or “Set Protect”
button.
*For Editing, see “6.2.5 User Program Edit Screen”, “6.2.9 Target MCU ID Code Setting Screen”, “6.2.10 ROM Area Block
Information Setting Screen”, and “6.2.11 ROM Protection Setting Screen”.
*With the default setting, DATA area, program ROM2 area, user boot mat area and E2 data flash area are not set.
*Edited contents are saved in the project file. For the project file, see “
⑩
Save project (device setting) file”.
⑧
Select execution process
・
Select an execution process from the “Action Mode” radio buttons.
*With the default setting, no process is selected.
*To select “Blank/Program/Verify”, “Erase/Blank/Program/Verify”, “Erase/Program”, “Erase/Blank” , “Blank” or “Chip Erase”,
check the “Enable Expansion Action Mode” check box in the maintenance screen.
