Serial Flash Programmer[S550-SFWv3] Operation Manual
11
2.7.
Target Connecting Cable
2.7.1.
14 – 14 Standard Cable
The attached
connecting cable is a straight cable. In case the connector specifications of the board you use are
different, or you wish to adjust the cable length, prepare a cable that matches the above pin assignment. The length
of the cable shall be 500mm or shorter.
2.7.2.
14 – 10 Standard Cable
The attached
connecting cable converts 14pin connector to 10pin(Applicable for M16C Family/ Standard serial
I/O mode 1). You can use this cable to connect S550-SFWv3 and the target board that has 10pin connector. When
using this product, refer to the file “S550-SFWv3 Examples of circuit for serial programming”in the enclosed
CD-ROM. This cable can be used only when the pin assignment of the 10pin connector side is the same.
2.7.3.
14 – 20 Custom1 Cable(model: S550-SFW-CB1)
The optional
connecting cable converts 14pin connector to 20pin(Applicable for RX,H8SX,H8S,SuperH Family /
Generic BOOT).You can use this cable to connect S550-SFWv3 and the target board that has 20pin connector.
When using this product, refer to the file “S550-SFWv3 Examples of circuit for serial programming”in the enclosed
CD-ROM. This cable can be used only when the pin assignment of the 20pin connector side is the same.
Your
Target board side
S550-SFWv3 side
(with Lock)
Connector model: XG4M-1430-U
OMRON Corp.
Connector model: HIF3BA-10D-2.54C
HIROSE Electric
1
2
13
14
2
1
9
10
500mm
Connector model: XG4M-1430-U
OMRON Corp.
Connector model: HIF3BA-20D-2.54C
HIROSE Electric
500mm
Your
Target board side
S550-SFWv3 side
(with Lock)
1
2
13
14
2
1
19
20
500mm
Your
Target board side
S550-SFWv3 side
(with Lock)
2
1
13
14
1
2
13
14
Connector model: XG4M-1430-U
OMRON Corp.
Connector model: XG4M-1430-T
OMRON Corp.