Sungrow SG1K5TL-31, User Manual

Page: 33 / 79

Installing Inverter onto Wall
4
27
4.7
Installation Procedure
There is a backplate and fasteners supplied to install the inverter. If you don’t want to
use the supplied backplate, you can drill holes referring to its dimension below.
Fig 4-4 Dimensions of Backplate(unit: mm)
Fig 4-5 Dimensions of Fastener Set (unit: mm)
INSTALLATION PROCEDURE:
Step 1: Get the supplied backplate and fasteners from the packaging.
Step 2: Choose the best installation site according to above requirements. Place the
backplate onto the chosen wall and adjust it until it is in a horizontal position.
Step 3: Mark the positions to drill holes using the backplate as the template.
Step 4: Drill six holes at the marks you have made.