5 Installing Inverter onto Wall
User Manual
24
Fig. 5-2
Dimensions of Expansion Bolt Set for Concrete Wall (unit: mm)
Fig. 5-3
Dimensions of Fastener Set for Metal Frame(unit: mm)
5.3.1 Installing the Inverter on Concrete Wall
Step 1
Remove backplate and fasteners from the packaging.
Step 2
Place the backplate onto the chosen concrete wall and adjust it until it is in a
horizontal position.
Step 3
Mark the positions to drill holes using the backplate as the template.
Step 4
Drill holes according to the marks made before.
In order to avoid electrical shock or other injury, inspect existing electronic or
plumbing installations before drilling holes.
Step 5
Attach the backplate to the wall firmly with the supplied expansion bolt set.
The torque for fastening the nut is 35 N
m.
Fig. 5-4
Fasten the Backplate against Concrete Wall with M10*80 Expansion Bolt Set
Summary of Contents for SG10KTL
Page 2: ......
