background image

3

DANGER

Ultraviolet radiation. Follow instructions. Avoid overex-
posure. As with natural sunlight, overexposure can cause 

eye and skin injury and allergic reactions. Repeated exposure may cause prema-
ture aging of the skin and skin cancer. WEAR PROTECTIVE EYEWEAR; FAILURE TO 
MAY RESULT IN SEVERE BURNS OR LONGTERM INJURY TO THE EYES. Medica-
tions or cosmetics may increase your sensitivity to the ultraviolet radiation. Consult 
physician before using sunlamp if you are using medications or have a history of skin 
problems or believe yourself especially sensitive to sunlight. If you do not tan in the sun, you 
are unlikely to tan from the use of this product. Children, the elderly, or fair skinned people 
who always burn easily and either never tan or tan minimally should not use this equipment.

Contraindication:

 This product is contraindicated for use on persons under the age of 18 

years. 

Contraindication:

 This product must not be used if skin lesions or open wounds 

are present.
Center yourself within the booth both front and back and to the left and right. Other posi-
tions may result in overexposure to parts of your body. Do not use without clear plastic 

panels in place. Untanned persons should not tan on consecutive days during their first 

week of tanning. Never tan more than once a day. Tanning normally appears after the 

first few sessions and maximizes after approximately four weeks. Tan once or twice per 

week thereafter to maintain appearance. Persons already having a base tan may begin at 
advanced levels corresponding to the extent of their base tan.

Skin Type:
I  Sensitive Skin

 (Burns easily and severely and does not tan.)

II  Light Skin

 

(Burns easily and severely and tans minimally.)

III  Normal Skin

  (Burns moderately and tans average.)

IV  Dark Skin

 

(Burns minimally, tans easily and above average.)

New lamps emit approximately 10% more ultraviolet radiation during the first 50 hours of 

operation. Recommended tanning times should therefore be reduced by approximately 
10% during that period.

WARNING:

 • Read these instructions before using this sunlamp product. • This product 

should not be used on individuals who have had skin cancer or have a family history of skin 
cancer. • Persons repeatedly exposed to UV radiation should be regularly evaluated for 
skin cancer. • All persons in the room should wear protective eyewear when lamps are on. 

Recommended eyewear: provided eyeshields or equivalent eyewear as defined under 21 
CFR 1040.20. Other types of eyewear may not provide adequate protection. Failure to use 

protective eyewear may result in severe burns or other eye injury. If discomfort develops, 
discontinue use and consult a physician.

THE FOLLOWING LAMPS HAVE BEEN CERTIFIED FOR USE IN THIS EQUIPMENT:

Sunfire® Plus

 FR71/160W

CAUTION: To achieve compliance with Canadian Standards Association’s (CSA) stan

-

dard CAN/CSA C22.2 No. 224, connect only to a circuit protected by a Class A Ground 
Fault Circuit Interrupter.

THIS EQUIPMENT MUST BE EARTH GROUNDED. 

This product is in conformity with performance standards for sun lamp products under 21 
CFR PART 1040.20 and ANSI/UL Standard 482.

 Certified to CAN/CSA Standard C22.2 

NO. 224.

Disconnect power cord before attempting to clean, relamp, 

or engage in the maintenance of this product

DANGER

Rayonnement  ultraviolet.  Veuillez  suivre  les  instructions. 
Évitez  une  exposition  excessive.    Tout  comme  pour  les 

rayons du soleil, une exposition excessive peut causer des blessures aux yeux et à 

la peau et provoquer des réactions allergiques. Une exposition répétée peut causer 

le vieillissement prématuré de la peau et provoquer le cancer de la peau. PORTEZ DES 

LUNETTES PROTECTRICES:  LE NON-RESPECT DE CETTE CONSIGNE DE SÉCURITÉ 

PEUT ENTRAÎNER DE GRAVES BRÛLURES OU DES LÉSIONS OCULAIRES À LONG 

TERME. Les médicaments ou les produits cosmétiques peuvent augmenter votre sensi-

bilité au rayonnement ultraviolet. Consultez un médecin avant d’utiliser la lampe solaire si 
vous prenez des médicaments, si vous souffrez d’une maladie cutanée ou si vous croyez 
être particulièrement sensible aux rayons du soleil. Si vous ne bronzez pas au soleil, il est 
peu probable que vous bronzerez sous une lampe solaire. Les enfants, les personnes âgées 
et les personnes qui ont une peau claire qui brûle facilement, ne bronze jamais ou alors très 

peu, ne devraient pas utiliser cette lampe.

Placez-vous au centre du compartiment (aussi bien de l’avant à l’arrière que sur les côtés). 

Ainsi, le corps sera à distance égale de toutes les lampes. Un mauvais alignement peut 

causer une exposition excessive de certaines parties du corps. N’utilisez pas la lampe sans 
les panneaux de plastique transparents. La première semaine de bronzage, les personnes 
qui n’ont pas un hâle initial ne doivent pas se faire bronzer tous les jours. Ne vous faites 
jamais bronzer plus d’une fois par jour. Le bronzage commence normalement à apparaître 
après les premières séances :  il atteint son apogée au bout d’environ quatre semaines. Les 
personnes qui ont déjà un teint hâlé peuvent commencer à des niveaux plus élevés, selon 
l’importance de leur hâle initial.

Type de peau:

I  Peau sensible

  (brûle facilement et ne bronze pas)

II  Peau claire

 

(brûle facilement et bronze très peu)

III  Peau normale

  (brûle et bronze de façon modérée)

IV  Peau foncée

 

(brûle très peu, bronze plus facilement que la moyenne)

Les lampes neuves émettent approximativement 10 % de plus de rayons ultraviolets au 

cours des 50 premières heures de fonctionnement. Le temps de bronzage doit donc êatre 
réduit d’environ 10 % pendant cette période.

AVERTISSEMENT : • Lisez le livret d’instructions avant d’utiliser cette lampe solaire. • Les 

autres personnes présentes dans la pièce doivent aussi porter des lunettes protectrices 
lorsque les lampes sont allumées. Coquilles de protection pour les yeux recommandées:  

Les coquilles de protection fournies ou l’équivalent, tel que le stipule le document 21 CFR 
1040.20. Les autres types de lunettes protectrices peuvent ne pas assurer une protection 

adéquate. Utilisé sans lunettes protectrices, ce produit peut causer des brûlures ou lé-

sions oculaires graves. Si vous souffrez d’un malaise, arrêtez l’utilisation et consultez un 

médecin.

SEULES LES LAMPES SUIVANTES ONT ÉTÉ HOMOLOGUÉES POUR CET ÉQUIPEMENT :

Sunfire® Plus

 Modèle FR71/160W

ATTENTION: Pour Répondre à la norme CAN/CSA C22.2 No 224 de L’Association Ca

-

nadienne de Normalisation (CSA) , brancher seulement à une dérivation protégée par 

un disjoncteur différentiel de Classe A.

Cet équipement doit être mis à la terre.
Ce produit est conforme aux normes de rendement pour les lampes solaires dans le docu-

ments 21 CFR, partie 1040.20 ,  ANSI/UL 482 , CAN/CSA C22.2 N° 224.

Débrancher l’alimentation électrique avant de nettoyer l’appareil , 

d’en faire l’entretien ou de changer les lampes

TEMPS D’EXPOSITION RECOMMANDÉ EN MINUTES

    

Élevé 1/Semaine 1 

Élevé 2

 

Élevé 3

 

Élevé 4

 

Élevé 5

Type de peau: 

1ere-3e Sessions

I  Peau sensible  

NON RECOMMANDÉ

II  Peau claire  2 

4  6  8 10

III  Peau normale 3 

5  7  10 10

IV  Peau foncée  4 

6  8  10 10

LE TEMPS D’EXPOSITION MAXIMAL EST DE 10 MINUTES

RECOMMENDED EXPOSURE TIMES IN MINUTES

   

Level 1/Week 1 

Level 2 

Level 3 

Level 4 

Level 5

Skin Type: 

1st-3rd Sessions

I  Sensitive 

 

 NOT RECOMMENDED FOR TANNING

II Light 

10

III Normal 

10 

10

IV Dark 

10 

10

MAXIMUM EXPOSURE TIME IS 10 MINUTES

Summary of Contents for Platinum PRO48X









Reviews: