2
Connect the Door to Control
Unit, and Side Unit to Control
Unit power cords. Make sure
the connections are secure.
7
Plug the three-prong 208V AC
power cord into a dedicated outlet
(see
Electrical Requirements
).
8
Using a #2 Phillips screwdriver, remove
the center screw securing the top endcap
on the Side Unit, indicated by the arrow.
4
Plug the fan’s power cord
into the connector coming
out of the endcap.
6
WHEELS
Connect the Door Unit to the Control
Unit. As before, be sure the white Nylon
Washer is between the hinge brackets.
3
The Side Brace keeps the Control Unit and
Side Unit from opening up. Position the
two units as shown, and insert the pins on
the Side Brace into the holes in the extrud-
ed bosses on the endcaps. Move the units
until the brace fits into the holes.
2
Secure the body fan bracket to the
endcap by inserting the included
longer screw through the hole in
the bracket and into the hole in the
endcap, as shown.
The bend in the bracket will engage
the vent slot to keep the body fan
stationary.
5
