NRX
®
Strap · Knee Ligament
– One strap, unlimited options!
NRX
®
Knee Ligament
Mediroyal Nordic AB · Box 7052 · 192 07 Sollentuna · Sweden · Tel +46 8 506 766 00 · [email protected] · www.mediroyal.se
Material
NRX
®
Strap 110 mm, NRX
®
Strap PLUS 50 mm or 80 mm
Cut a thigh- and calf anchor from
the 110 mm NRX
®
Strap. Attach one
hook piece onto one of the sides.
Then cut two side wraps that should
be equally long and with a width
of 80–90 mm from NRX
®
Strap
110 mm. The alternative could be
to use the NRX
®
Strap PLUS in 80
mm for more stability. Attach hook
tabs to each end. Then last cut two
reinforcement straps from 50 mm
NRX
®
Strap PLUS and attach hooks
on each end.
1
Apply the thigh and calf anchors with some compression and fixate them with
the hook tabs.
2
© Mediroyal Nordic AB 2019
Attach the first side wrap onto the backside of the medial part of the calf anchor. Pull the strap externally with an even
tension wrapping the strap just under the patella, covering the lateral collateral ligament and attach it on the lateral side of
the thigh anchor.
3
