Sunex DROPS D4.1, Operating Manual And Assembly

Page: 18 / 24

-18-
The above values of COP and heating times were established in the following conditions: Drawn air temperature: 35 ° C.
The pump connected directly to the water tank. The air drawn directly from the room. In different conditions the above
values may change.
Scope
External temperature
min/max [°C]
+5/ +43
The temperature of hot water with the heat pump MAX ° C 60
°C
60
The temperature of the hot water with the electrical heater.
°C 75
Minimum installation area
Heat-carrying agent
Electrical power supply:
2
m 1
Water
1/N/PE 220-240V/50Hz
-
-
Electrical parametres
Recommended security
COP, water heating 10 ÷ 40°C:
COP, water heating 10 ÷ 45°C:
COP, water heating 10 ÷ 50°C:
COP, water heating 10 ÷ 55°C:
Heating time for 100 L water at 10 ÷ 40°C:
Heating time for 100 L water at 10 ÷ 45°C:
Heating time for 100 L water at 10 ÷ 50°C:
Heating time for 100 L water at 10 ÷ 55°C:
Maximum heating capacity for drawn air
temperature of 35°C:
Average heating capacity for drawn air
temperature of 35°C and water heating
from 10 to 55 °C:
Energy consumption for drawn air temperature
of 35°C:
A
A
A
W
W
C6
min 0,29kW, max. 0,65kW
2,57 kW
1,9 kW
6,9
6,6
5,7
4,9
1,5h
1,9h
2,6h
3,4h
Max. starting electricity of the heat pump
Max. work electricity of the heat pump
Power of absorb
15,2
3
90
fan
max 55
circulation pump
Working factor
Refrigerant/ quantity type/kg R134a/ 0,6 kg
Maximum permissible pressure (low pressure)
bar 7
Maximum permissible pressure (high pressure)
bar 23
Dimensions
Diameter
Ø mm 668
Height mm
512
Weight
kg
45
Heating circuit parameters
Connectors for the heating circuit
cal 2xGW 3/4"
Minimum tube inside diameter mm
20
Flow 3
m /h
0,280
Working factor -
water/propylene glycol
Compressor type
Type of the air-compressor oil rotary
ATMOS-RB68EP/FVC68D Quantity: 320 ml ±20
The producer is reserving the right for changes of included information in the instruction