Sunex DROPS D4.1, Operating Manual And Assembly

Page: 4 / 24

Heat pump DROPS D 4.1 is a device for utility water heating. It uses the rotary compressor optimised for high
condensation temperatures, i.e. High heating temperatures of utility water. The air flow via the finned coil is forced by
modern, powerful and energy efficient EBM PAPST fan. Water heating is in the SWEP plate exchanger of stainless
steel, and a water circulation is forced by the installed in the heat pump the WILO circulating pump adapted also to work
directly with utility water. The correct operation of the heat pump is ensured by the controller with algorithm optimized for
the heat pump DROPS D 4.1 construction. The housing is made of ABS plastic. All the above mentioned
characteristics/components comprise the high quality and efficiency of the heat pump.
Any operations not described in this manual must be carried out in accordance with the accepted rules of installation
knowledge.
1. Description of Heat Pump
2. Construction of Heat Pump
Control panel
Air inlet
Air outlet
Hot water outlet
Cold water inlet
The power cord is located on the back of the unit
Air outlet Air inlet
-4-