8
INSTALLING THE CO
2
AIR LINE TO REGULATOR
Attach the open end of the red hose to the hose barb
connection on the regulator.
Secure hose by using one of the provided clamps.
Use pliers/screwdriver to tighten clamp and assure no
leaks.
•
•
•
INSTALLATION INSTRUCTIONS (continued)
INSTALLING THE BEER TOWER
Remove the top plug by twisting and pulling out, saving it for later use if you decide to convert unit
to an “all-refrigerator”.
Unravel the beer line (clear hose) from the tower and insert the beer line and wing nut through the
uncovered hole on top.
Lock the beer tower assembly to the top and make sure to position the beer faucet so it is aligned with
the cabinet front (6 o’clock position). To do so, align the bottom of the beer tower to the 3 grooves on
the top cabinet and tighten by hand clockwise to properly lock.
•
•
•
INSTALLING THE PROTECTIVE METAL PLATE
This plate should always be installed when the keg is in place to protect against unnecessary damage
to the
fl
oor of the cabinet.
•
INSTALLING THE PROTECTIVE METAL PLATE
Position the beer keg directly in front of the open door.
Using keg handles only, carefully lift the beer keg.
To place the beer keg inside the cabinet, brace your
knees behind the beer keg. Lift the front of the keg just
enough so the front edge of the keg is resting on the
front edge of the Beer dispenser bottom cabinet.
Grasp the keg handles and slide it all the way into the
cabinet.
•
•
•