![background image](http://html1.mh-extra.com/html/sunbeam/sbfnss1/sbfnss1_instruction-manual_1394654007.webp)
6
TEST THE COLLAR
In order to make sure the Receiver Collar is working properly
you must test it using your pre-installed Sunbeam® Essential
In-Ground Fencing System. Do not test the Receiver Collar
while it is on your dog.
• Place the Test Light indentation holes directly onto the
Receiver Collar stainless steel probes. (fig. 4)
• Slowly bring the Receiver Collar near the Boundary Wire
at your pet’s neck level with probes facing up (fig. 5). If the
system is working correctly you will hear a Warning Tone.
Continue toward the Boundary Wire until you see the Test
Light flash (fig. 6). If you do not hear the Warning Tone or
see the flash you should review the previous directions.
figure 4
figure 5
figure 6