All information is based on the latest product information available at the time of publication. Kohler Co.
reserves the right to make changes in product characteristics, packaging, or availability at any time without
notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove any debris.
2. An in line water filter must be used with this product.
3. Inspect the supply pipes for damage. Replace as necessary.
4. Observe local plumbing codes.
5. Recommended working pressure: 100KPa to 500KPa.
6. Maximum working pressure: 800KPa.
7. All installations should comply with the relevant requirements of AS/NZS 3500.
1142969-AN2-A
15/10/12
Wall Mount Bath Spout: 8161A
BEFORE YOU BEGIN
INSTALLATION INSTRUCTIONS
ROUGH-IN DIMENSIONS
Wall Mount Bath Spout
SINGULIER
BATH TAPWARE
1
G 1/2"
57
47
158
185
160
3.8
˚
Fringe Of Bath
8161A
