Sun Blade 1000 and Sun Blade 2000 UltraSPARC III Cu CPU Module Installation Guide
11
Attaching the Disposable Antistatic Wrist Strap
Caution –
Wear an antistatic wrist strap and use an antistatic mat when handling
Sun Blade 1000 and Sun Blade 2000 components. Before servicing or removing
workstation components, attach the strap to your wrist and then to a metal area on
the chassis. Then disconnect the power cord from the workstation and the wall
receptacle. This procedure equalizes all electrical potentials within the workstation.
1. Place the workstation on its side on a work surface, open side facing up
(
FIGURE 5
)
.
2. Unwrap the first two folds of the disposable antistatic wrist strap and wrap the
adhesive side firmly against your wrist.
3. Peel the liner from the copper foil at the opposite end of the wrist strap.
4. Attach the copper end of the wrist strap to the chassis
(
FIGURE 5
)
.
5. Disconnect the power cord.
FIGURE 5
Attaching the Antistatic Wrist Strap to the Chassis
Antistatic wrist strap
Power cord
Chassis
