Sun Microsystems Sun Secure Global Desktop 4.5, User Manual

Page: 49 / 56

Appendix C Profile Settings 41
Configuring Integrated Mode Operation
The following settings on the Client Settings tab are used for configuring Integrated
mode operation of SGD:
■
Connect on System Login
■
Automatic Client Login
■
Add Applications to Start Menu
See “Using SGD From Your Desktop Start or Launch Menu” on page 23 for more
information.
Check for Local X Server If enabled, the SGD Client checks whether there is an X server running on the
computer.
Enabling this option can improve performance when launching X applications
that are configured to display using an X server on the computer.
This setting only applies to Windows computers.
This setting is disabled by default.
Proxy Settings Settings that control how the SGD Client determines what proxy servers to
use.
Use Default Web Browser Settings means use the proxy server settings
configured in your default browser.
Manual Proxy Settings enable you to define the proxy server settings in the
profile. You can specify an Hypertext Transfer Protocol (HTTP) proxy server.
If the proxy settings are determined from a browser, the settings are stored
and used the next time the SGD Client starts.
If Establish Proxy Settings on Session Start is enabled, the SGD Client obtains
the proxy settings from the browser every time it starts. The stored proxy
settings are not used. If Automatic Client Login is selected, the Establish
Proxy Settings on Session Start setting is not available.
By default, the Use Default Web Browser Settings check box is selected and
the Establish Proxy Settings on Session Start check box is not selected.
Connection Failure Settings that control what the SGD Client does if the connection to an SGD
server is lost: Whether to always reconnect, to never reconnect or to ask you
what to do.
If the SGD Client reconnects, these settings control how many attempts are
made to reconnect and the time in seconds between each attempt.
If the SGD Client is unable to reconnect, the webtop session ends and any
running applications are ended or suspended, depending on how they have
been configured for you.
The default settings are: Always Attempt to Reconnect, Number of Attempts:
6, and Interval: 10.
Setting Description